Send Inquiry

Request To Call Back

PEPPERL+FUCHS KFD2-ER-EX1.W.LB

Get a Price/Quote

PEPPERL+FUCHS KFD2-ER-EX1.W.LB Specification

Rated Power
Signal-level switching (relays do not provide rated power output)

Operating Temperature
-20C to +60C

Cooling Method
Natural air convection

Application
Use in hazardous area signal isolation and relay switching, suitable for process automation

Noise Level
Silent relay operation

Rated Current
Max. 6 A

Power Supply
24 V DC nominal

Working Temperature
-20C to +60C

Current Range
Control signal relay only; switching up to 6 A

Features
Relay output, line fault detection, hazardous area approved (ATEX), LED indication, removable terminals

Power Factor
Not applicable for signal relay modules

Output Current
Max. 6 A at 250 V AC, Max. 6 A at 24 V DC

Output Type
Relay contact; changeover (SPDT)

Phase
Single-phase signal output

Connector Type
Removable terminal blocks

Product Type
1-channel relay module with relay contact output for hazardous areas

Output Power
Standard relay switching (no power rating, signal level)

Output Frequency
DC switching relay output (not frequency based)

Input Voltage
20 V DC to 35 V DC

Voltage Protection
Reverse polarity protection integrated

Efficiency
Industrial efficiency, optimized for control signal relay

Material
Polycarbonate enclosure

Storage Temperature
-25C to +70C

Weight
Approx. 150 g

Terminal Type
Screw terminals

Relay Contact Type
Changeover (SPDT); NO/NC contacts

System Integration
Can be used with DCS, PLC, and ESD systems

Dimensions (W x H x D)
20 mm x 119 mm x 115 mm

Rejection of false signals
Integrated line fault detection and rejection of false input signals

Relay Life
Mechanical: 10 million cycles; Electrical: 100,000 cycles at full load

Protection Class
IP20

Intrinsic Safety
Suitable for mounting in hazardous area; ATEX II (1)G [Ex ia] IIC

LED Indication
Status and fault indication

Relay Type
Electromechanical

Mounting Type
DIN rail (35 mm) EN 60715

Safety Standard
EN 60079-11, EN 60079-0

Relay Output Load
250 V AC, 6 A; 24 V DC, 6 A maximum

Response Time
Approximately 20 ms

Signal Type
Binary electronic relay switching

About PEPPERL+FUCHS KFD2-ER-EX1.W.LB

Discover a dazzling deal with the top-rated PEPPERL+FUCHS KFD2-ER-EX1.W.LB relay, designed for imposing performance in hazardous area signal isolation. Equipped with superb features like binary electronic relay switching, integrated line fault detection, and LED status indication, this relay guarantees safety and reliability. Mountable on a 35 mm DIN rail, it supports both NO/NC contacts and can handle loads up to 250 V AC/6 A. With limited stock available, it is tailored for seamless integration into DCS, PLC, and ESD systems, making it ideal for demanding industrial environments. Dont miss this exclusive product!

Exceptional Versatility Across Industrial Applications

The PEPPERL+FUCHS KFD2-ER-EX1.W.LB excels in mounting on standard DIN rails, making it suitable for diverse industrial surfaces. Its application is fundamental in environments requiring reliable signal isolation and relay switching, particularly in hazardous areas. Specifically used in process automation, it integrates effortlessly with DCS, PLC, and ESD systems, ensuring operational safety and efficiency for facilities handling electronic control signals in oil, gas, chemical, and manufacturing plants.

Reliable Certifications and Assured Market Value

Holding certifications like ATEX II (1)G and compliance with EN 60079-11/EN 60079-0 standards, the KFD2-ER-EX1.W.LB assures superb safety. Its commanding market value is bolstered by the offer of sample availability and secure shipping options across India. Backed by consistent supply ability from trusted suppliers and traders, you can confidently secure this product for your hazardous area process control requirements, guaranteeing efficiency and peace of mind in every delivery.

FAQs of PEPPERL+FUCHS KFD2-ER-EX1.W.LB:

Q: How does the PEPPERL+FUCHS KFD2-ER-EX1.W.LB provide intrinsic safety in hazardous areas?

A: The relay is ATEX II (1)G certified and compliant with EN 60079-11/EN 60079-0 standards, making it suitable for mounting in hazardous locations with high safety demands.

Q: What are the primary application areas for this relay module?

A: It is mainly used for signal isolation and relay switching in process automation, ideal for industries such as oil & gas, chemical processing, and manufacturing.

Q: Where can I mount the KFD2-ER-EX1.W.LB?

A: Installation is straightforward on a 35 mm DIN rail according to EN 60715, making it compatible with standard industrial control panels.

Q: What types of systems can this relay interface with?

A: This relay can seamlessly integrate with DCS, PLC, and ESD systems, enhancing process control and automation applications.

Q: How does the integrated line fault detection work?

A: The relay features intelligent line fault detection and rejection of false input signals, ensuring accurate and error-free control operations in critical processes.

Q: When is it beneficial to use this relay over standard models?

A: Its benefit is most pronounced in hazardous area applications requiring intrinsic safety, superior reliability, and where signal integrity is crucial.

Tell us about your requirement